With the ever changing electrical codes, MidNite Solar engineers stay ahead of the industry.

With the ever changing electrical codes, MidNite Solar engineers stay ahead of the industry.

With the ever changing electrical codes, MidNite Solar engineers stay ahead of the industry.

With the ever changing electrical codes, MidNite Solar engineers stay ahead of the industry.

With the ever changing electrical codes, MidNite Solar engineers stay ahead of the industry.

A DC-Ground Fault Protector is now required on all PV systems by the NEC 2008. All MidNite Solar circuit breakers are rated for 100% continuous duty. Listed by ETL for US & Canada.

A DC-Ground Fault Protector is now required on all PV systems by the NEC 2008. All MidNite Solar circuit breakers are rated for 100% continuous duty. Listed by ETL for US & Canada

A DC-Ground Fault Protector is now required on all PV systems by the NEC 2008. All MidNite Solar circuit breakers are rated for 100% continuous duty. Listed by ETL for US & Canada.

These MNEPV breakers are the same as CBI QY breakers available elsewhere except MidNite Solar’s are 150VDC!

All MidNite Solar circuit breakers are rated for 100% continuous duty. Listed by ETL for US & Canada.

Located at ground level, the Birdhouse provides a safe means to disconnect high voltage PV arrays from MidNite Disconnecting and Arc Fault combiners. Firefighter Approved!

MidNite Solar offers a range of PV combiner boxes designed to work in a variety of solar PV systems, from small off-grid arrays to large 100 kW commercial systems.

Ideal for both large and small PV systems, the highly adaptable OutBack FLEXware PV boxes are outdoor-rated, rainproof, 3R powder-coated aluminum, and can be mounted vertically, on a pole, or laid on a roof with as little as 14° of slope. Their unique, angled, negative-terminal bus-bar design makes wiring fast and easy. USA

General use enclosures for retrofits, small inverter disconnect, PV disconnect, AC or DC distribution or? Used all around the world. ¾ & 1” knockouts each end. Accepts up to 4 Dinrail mount breakers from 1 to 63 Amps.

The Big Baby Box from MidNite Solar is a general use enclosure that holds up to four 13mm wide dinrail breakers from 1-63 amps.

Save time and money! Designed for use with most commercially available inverters and up to two charge controllers, the MidNite Solar E-PANEL Lite significantly reduces installation time of your inverters system by simplifying wiring and inverter mounting, and with complete all-in-one components.

The MidNite Solar E-PANEL system simplifies installation of balance of system components, and provides a clean, attractive finished product. Also available for use with OutBack, Magnum Energy and almost any inverter on the market.

Less Expensive and More Features than the Xantrex XW Power Distribution Panel (PDP)! The Xantrex XW E-Panel from MidNite Solar significantly reduces the installation time of your Xantrex XW system by simplifying wiring and inverter mounting, and with complete all-in-one components,

MidNite Solar offers a range of PV combiner boxes designed to work in a variety of solar PV systems, from small off-grid arrays to large 100 kW commercial systems.

Inverter installation has gone from hours to minutes! The MidNite Solar OutBack E-PANEL system significantly reduces installation time by simplifying wiring and inverter mounting, and with complete all-in-one components. Available for use with OutBack, Xantrex, Magnum Energy and products from most other well-known manufacturers. U.S.A.

The FLEXware FW-1000 system is an integrated, modular architecture that will house up to four OutBack FX Series Inverter/Chargers, four OutBack MX charge controllers and all the associated AC and DC components. Gives you a clean, attractive installation in the least amount of space. For use in homes, commercial or village power systems with large power requirements.

For applications with modest power requirements that need only a single OutBack FX inverter-charger and one MX series MPPT charge controller. Use the FW-250 for as the DC and/or AC breaker enclosure. No mounting plate is needed.

The OutBack FLEXware 500 is an integrated, modular system architecture that will house up to two OutBack FX Series Inverter/Chargers, two OutBack charge controllers and all the associated AC and DC components. Gives you a clean, attractive installation in the least amount of space. For use in homes, light commercial or other back-up power systems with medium power requirements.

Ideal for both large and small PV systems, the highly adaptable OutBack FLEXware PV boxes are outdoor-rated, rainproof, 3R powder-coated aluminum, and can be mounted vertically, on a pole, or laid on a roof with as little as 14° of slope. Their unique, angled, negative-terminal bus-bar design makes wiring fast and easy. USA

The factory-wired XW Power Distribution Panel (XW PDP) saves significant time and money on installation of balance of system components. It has plenty of room to add wiring and breakers to expand the XW System with up to three inverters, four charge controllers, or other equipment to support 120/240-volt, three-wire, single-phase systems. With a field-reversible door and multiple conduit knockout locations, the XW-PDP can be configured to mount on either side of the inverter/charger.

A welcome replacement for the less sophisticated arrestors that have been the standard of the industry for years, the MidNite Solar Surge Protective Device (MNSPD) is now the only lightning arrestor we sell! Designed for indoor and outdoor applications and for both AC and DC electric systems, MidNite Solar SPD’s provide protection to service panels, load centers or wherever the SPD is directly connected to an electronic device requiring protection. Made in the U.S.A.!

This MidNite Solar pre-wired E-Panel system will save you time and money on the installation of your Magnum MS4024-AE inverter and other balance of system components. Professionally assembled and tested by MidNite Solar.

A MidNite Solar MNEMS4448PAECL150 Pre-Wired Off-Grid Inverter-Charge Controller System will save you time and money on installation of your balance of system components, and give you an attractive, clean looking setup.

Professionally assembled and tested by MidNite Solar in one convenient and clean assembly, the MidNite Solar MNEPLUSGVFX3524CL150 OutBack Inverter-Charge Control package for grid-tie with battery backup solar saves time and money on your installation.

MidNite Solar pre-wired dual OutBack inverter E-Panels save time and money on the installation of your balance of system components.

Professionally assembled and tested by MidNite Solar in one convenient and clean assembly, the MNEPLUSGVFX3648CL150 Inverter-Charge Controller assembly saves you time and money on the installation of your grid-tie with battery backup solar system.

The MNEPLUSVFX3524CL150 OutBack E-Panel from MidNite Solar houses the balance of system components for your off-grid solar system in one convenient assembly.

The pre-wired MNEPLUSVFX3648CL150 OutBack inverter E-Panel from MidNite Solar saves time and money on the installation of your balance of system components. Professionally assembled and tested by MidNite Solar in one convenient and clean assembly.

Professionally assembled and tested by MidNite Solar in one convenient and clean assembly, the MidNite Solar MNESTSVFX3524CL150 OutBack Inverter-Charge Control package for off-grid solar saves time and money on your installation.

The pre-wired MNESTSVFX3648CL150 OutBack inverter E-Panel from MidNite Solar saves time and money on the installation of your balance of system components. Professionally assembled and tested by MidNite Solar in one convenient and clean assembly.

The OutBack FLEXpower One is a pre-wired single power inverter system. It houses all the essential protective devices in the least amount of space, at an affordable price. The true sinewave OutBack FLEXpower One optimizes space, decreases installation time, reduces installation costs, looks great too!

The OutBack FLEXpower TWO optimizes space, decreases installation time, and reduces installation costs. This pre-wired dual power inverter system houses all the essential protective devices in the least amount of space – at an affordable price. Optional kits are also available for charge controllers and DC system monitoring, that help maintain a small system footprint.