The Magnum Energy ME series of inverter-chargers provide modified sine wave power for mobile applications in the RV, marine and truck markets where 12-volt input is common. Easy to install and operate. Very competitively priced. Available in 2000, 2500, and 3100 watt models.

The MM Series modified sine wave power inverter is the most cost effective inverter available from Magnum Energy. Designed to accommodate entertainment systems and small appliances in smaller RV’s and boats. Available in 600 and 1200 watt models.

A cost effective, modified sine wave solution for off-grid cabins and homes with small loads. This lightweight, compact inverter-charger is available in 600 and 1500 watt capacities.

Magnum Energy’s MMS power inverters are a pure sinewave, cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MMS Series provides a reliable base for your energy system.

Designed for off-grid or mobile applications, Magnum Energy’s MS series provides the clean, pure sinewave power your stereo, plasma screens, and other sensitive electronics demand. Competitively priced, the MS Series is available in 2000, 2800 and 4000 watt models.

The MS-PAE Series from Magnum Energy is a pure sine wave inverter-charger that give you clean power for all your sensitive electronics. Provides 120 and 240 volt output in one unit, and can be connected together in a parallel configuration. Connecting inverters in parallel increases the inverter power and surge capacity. Available in 4000 watt (24Vdc) and 4400 (48Vdc) watt models.

A modified sine wave power inverter-charger series designed for renewable energy applications. The RD Series uses the same construction as the ME Series without a neutral bonding relay. Available in 1800, 2200, 2800, and 3900 watt models.

OutBack FX power inverters are the most advanced and adaptable inverters available for small or large off-grid solar electric systems. These stackable, true sine wave power inverter-charge controllers allow you to tailor your system to meet your specific power conversion requirements now and in the future.

OutBack GVFX (vented) and GTFX (sealed) inverters are for use with grid-tie renewable energy systems when battery back-up is desired. These true sine wave power inverters are highly efficient, and can be stacked to accommodate changes in your power requirements. Built-in automatic transfer switch. Designed to operate with other OutBack products as a coordinated system. Certified Made in Washington!

$4,095 The OutBack Radian GS8048 inverter-charger is a true innovation in the off-grid and grid-interactive markets. It incorporates a powerful DC to AC true sine wave inverter, battery charger and dual AC inputs, providing an 8000 watt, 120/240V split-phase total power solution.

The Xantrex XW series of inverter-charger offers an innovative, integrated design which minimizes external balance-of-system components. The XW4024, XW4548 and XW6048 can operate with generators and renewable energy sources to provide full-time off-grid or grid-tie with battery backup power. The XW offers high efficiency and unprecedented surge capacity to maximize the your return on investment. No other inverter-charger looks or performs like the Xantrex XW.

Certified Made In Washington! The Eltek THEIA HE-t UL inverters from Itek Energy define a new level of efficiency and user friendliness for isolated string inverters, making it the perfect choice for commercial and residential solar installations.

Enphase has discontinued production of the D380 microinverter due to the release of their new 215 series.

The Engage System is a plug and play cabling system that makes installation of the 215 series of microinverters simple and easy.

Enphase M190 and M210 micro-inverters are compact grid-tie MPPT inverter that attach directly to each solar panel. It gives you more design flexibility, greater energy harvest and increased system reliability. For use with 72 cell solar panels, they also provide web based per-module performance monitoring, so you can know how your system is operating at any time, wherever you are.

Enphase M215 microinverters were especially developed to maximize the performance of 60-cell photovoltaic modules in grid-tie applications. Ultra low profile, a full pound lighter than the M190 and M210 and more efficient. Plus a 25 year warranty and free lifetime monitoring service.

OutBack GVFX (vented) and GTFX (sealed) inverters are for use with grid-tie renewable energy systems when battery back-up is desired. These true sine wave power inverters are highly efficient, and can be stacked to accommodate changes in your power requirements. Built-in automatic transfer switch. Designed to operate with other OutBack products as a coordinated system. Certified Made in Washington!

$4,095 The OutBack Radian GS8048 inverter-charger is a true innovation in the off-grid and grid-interactive markets. It incorporates a powerful DC to AC true sine wave inverter, battery charger and dual AC inputs, providing an 8000 watt, 120/240V split-phase total power solution.

Power-One Aurora PVI 3.0, 3.6 and 4.2 residential inverters are ideal for small residential PV systems. Dual independent maximum power point tracking makes it an excellent option for rooftop installations with two different orientations (ie East and West).

The residential inverter is the ideal size for an average-sized family home.This family of single-phase string inverter complements the typical number of rooftop solar panels, allowing home-owners to get the most efficient energy harvesting for the size of the property.

We partnered two of the most popular products from two of the biggest names in solar, to bring you a powerful renewable energy solution at an incredible price.

The Sunny Boy 3000US and 4000US power inverters are everything you would expect from industry leading SMA: highly efficient, extremely reliable, user-friendly and versatile. Their compact design makes them ideal for residential and light commercial PV systems. Engineered and built to last. Standard ten year warranty.

Optimally suited for small to mid-range systems, the Sunny Boy 6000US, 7000US and 8000US can be integrated into SMA’s Sunny Tower when higher wattage is required. All four models are compatible with SMA system monitoring solutions. Designed to meet IEEE-1547 requirements. Highly efficient, user-friendly, and field-proven. Sunny Boy inverters are the most reliable inverter available.

The Xantrex XW series of inverter-charger offers an innovative, integrated design which minimizes external balance-of-system components. The XW4024, XW4548 and XW6048 can operate with generators and renewable energy sources to provide full-time off-grid or grid-tie with battery backup power. The XW offers high efficiency and unprecedented surge capacity to maximize the your return on investment. No other inverter-charger looks or performs like the Xantrex XW.

The FLEXnet DC System Monitor integrates with your OutBack system and displays critical information on the display of your OutBack Mate. Monitors and displays battery level in an easy fuel-gauge style status bar. Shows state of charge and if the system is currently charging or discharging your batteries. Displays the amount of power your system is currently producing and consuming. Also shows system cumulative production for today or the last 128 days. Comes with a standard 2-year warranty.

The PSX-240 replaces the popular OutBack X-240, and is used for step-up, step-down or for generator and split phase output balancing applications.

Use a HUB-4 or HUB-10 communication manager when connecting an Outback MATE to more than one OutBack power conversion device. The HUB communicates stacking, load share and power save off/on signals, completely coordinating and managing your system via the MATE. Interconnection cabling is standard Ethernet CAT5 with RJ45 modular jacks.

Remotely manage and monitor multiple OutBack inverter-chargers, and DC monitoring devices with this well designed controller. The MATE3’s intuitive user interface and integrated system configuration wizard make programming and setup simple and straightforward.

The OutBack MATE is a complete system monitor and controller for all the OutBack conversion products in your system. A single MATE allows remote management and monitoring of multiple OutBack power conversion products. Add an OutBack HUB4 or HUB10 communications manager to connect from two to ten OutBack products.

Identical to the OutBack MATE except for appearance, the OutBack MATE2 is a complete system monitor and controller for all the OutBack conversion products in your system. A single MATE2 allows remote management and monitoring of multiple OutBack power conversion products. Add an OutBack HUB4 or HUB10 communications manager to connect from two to ten OutBack products.

The OutBack PSX-240 is a 6 kva step-up, step-down auto-transformer with a cooling fan. Can also be used for generator and split phase output balancing or as a series stacked inverter to load balancing auto-former

$3,959.00 – Save time and money with this MidNite Solar pre-wired E-Panel which includes a Magnum MS4024 inverter and an OutBack FM60 charge controller.

$3,860.00 – This MidNite Solar pre-wired E-Panel system will save you time and money on the installation of your Magnum MS4024-AE inverter and other balance of system components. Professionally assembled and tested by MidNite Solar.

$3,928.00 – A MidNite Solar MNEMS4448PAECL150 Pre-Wired Off-Grid Inverter-Charge Controller System will save you time and money on installation of your balance of system components, and give you an attractive, clean looking setup.

$3,839.00 – Professionally assembled and tested by MidNite Solar in one convenient and clean assembly, the MidNite Solar MNEPLUSGVFX3524CL150 OutBack Inverter-Charge Control package for grid-tie with battery backup solar saves time and money on your installation.

$6,995.00 – MidNite Solar pre-wired dual OutBack inverter E-Panels save time and money on the installation of your balance of system components.

$3,839.00 – Professionally assembled and tested by MidNite Solar in one convenient and clean assembly, the MNEPLUSGVFX3648CL150 Inverter-Charge Controller assembly saves you time and money on the installation of your grid-tie with battery backup solar system.

$3,839 – The MNEPLUSVFX3524CL150 OutBack E-Panel from MidNite Solar houses the balance of system components for your off-grid solar system in one convenient assembly.

$3,839.00 – The pre-wired MNEPLUSVFX3648CL150 OutBack inverter E-Panel from MidNite Solar saves time and money on the installation of your balance of system components. Professionally assembled and tested by MidNite Solar in one convenient and clean assembly.

$3,871.00 – The pre-wired MNESTSGVFX3524CL150 OutBack inverter E-Panel from MidNite Solar saves time and money on the installation of your balance of system components. Professionally assembled and tested by MidNite Solar in one convenient and clean assembly.

$3,871.00 – Professionally assembled and tested by MidNite Solar in one convenient and clean assembly MidNite Solar pre-wired OutBack inverter E-Panels save time and money on the installation of your balance of system components.

$3,871.00 – Professionally assembled and tested by MidNite Solar in one convenient and clean assembly, the MidNite Solar MNESTSVFX3524CL150 OutBack Inverter-Charge Control package for off-grid solar saves time and money on your installation.

$3,375.00 The OutBack FLEXpower One FP1-FX2524T (FP1-27) is a pre-wired single power inverter system. It houses all the essential protective devices in the least amount of space, at an affordable price. The true sinewave OutBack FLEXpower One optimizes space, decreases installation time, reduces installation costs, looks great too!

$3,375.00 The OutBack FLEXpower One FP1-FX3048T (FP1-26) is a pre-wired single power inverter system. It houses all the essential protective devices in the least amount of space, at an affordable price. The true sinewave OutBack FLEXpower One optimizes space, decreases installation time, reduces installation costs, looks great too!

$3,375.00 The OutBack FLEXpower One FP1-GTFX2424-HI (FP1-36) is a pre-wired single power inverter system specifically for the Hawaii market. It houses all the essential protective devices in the least amount of space, at an affordable price. The true sinewave OutBack FLEXpower One optimizes space, decreases installation time, reduces installation costs, looks great too!

$3,125.00 The OutBack FLEXpower One FP1-GTFX3048 (FP1-25)is a pre-wired single power inverter system. It houses all the essential protective devices in the least amount of space, at an affordable price. The true sinewave OutBack FLEXpower One optimizes space, decreases installation time, reduces installation costs, looks great too!

$3,375.00 The OutBack FLEXpower One FP1-GTFX3048-HI (FP1-37) is a pre-wired single power inverter system specifically for the Hawaii market. It houses all the essential protective devices in the least amount of space, at an affordable price. The true sinewave OutBack FLEXpower One optimizes space, decreases installation time, reduces installation costs, looks great too!

$3,425.00 The OutBack FLEXpower One FP1-GVFX3524 (FP1-3) is a pre-wired single power inverter system. It houses all the essential protective devices in the least amount of space, at an affordable price. The true sinewave OutBack FLEXpower One optimizes space, decreases installation time, reduces installation costs, looks great too!

$3,425.00 The OutBack FLEXpower One FP1-GVFX3648 (FP1-4) is a pre-wired single power inverter system. It houses all the essential protective devices in the least amount of space, at an affordable price. The true sinewave OutBack FLEXpower One optimizes space, decreases installation time, reduces installation costs, looks great too!

$3,425.00 The OutBack FLEXpower One FP1-VFX3024E (FP1-5) is a pre-wired single power inverter system for 230 volt/50hz applications that houses all the essential protective devices in the least amount of space, at an affordable price. The true sinewave OutBack FLEXpower One optimizes space, decreases installation time, reduces installation costs, looks great too!

$3,425.00 The OutBack FLEXpower One FP1-VFX3048E is a pre-wired single power inverter system for 230 volt/50hz applications that houses all the essential protective devices in the least amount of space, at an affordable price. The true sinewave OutBack FLEXpower One optimizes space, decreases installation time, reduces installation costs, looks great too!

$3,425.00 The OutBack FLEXpower One FP1-VFX3524 (FP1-1) is a pre-wired single power inverter system. It houses all the essential protective devices in the least amount of space, at an affordable price. The true sinewave OutBack FLEXpower One optimizes space, decreases installation time, reduces installation costs, looks great too!

$3,425.00 The OutBack FLEXpower One FP1-VFX3648 (FP1-2) is a pre-wired single power inverter system. It houses all the essential protective devices in the least amount of space, at an affordable price. The true sinewave OutBack FLEXpower One optimizes space, decreases installation time, reduces installation costs, looks great too!

$4,850.00 – The OutBack FLEXpower TWO FP2-FX2524T (FP2-32) optimizes space, decreases installation time, and reduces installation costs. This pre-wired dual inverter system houses all the essential protective devices in the least amount of space – at an affordable price.

$4,850.00 – The OutBack FLEXpower TWO FP2-FX3048T (FP2-31) optimizes space, decreases installation time, and reduces installation costs. This pre-wired dual inverter system houses all the essential protective devices in the least amount of space – at an affordable price. Optional kits are also available for charge controllers and DC system monitoring, that help maintain a small system footprint.

$4,850.00 – The OutBack FLEXpower TWO GTFX2524-HI (FP2-33) optimizes space, decreases installation time, and reduces installation costs. This pre-wired dual inverter system houses all the essential protective devices in the least amount of space – at an affordable price. Optional kits are also available for charge controllers and DC system monitoring, that help maintain a small system footprint.

$4,850.00 – The OutBack FLEXpower TWO FP2-GTFX3048 (FP2-25) optimizes space, decreases installation time, and reduces installation costs. This pre-wired dual inverter system houses all the essential protective devices in the least amount of space – at an affordable price. Optional kits are also available for charge controllers and DC system monitoring, that help maintain a small system footprint.

$4,850.00 – The OutBack FLEXpower TWO GTFX3048-HI (FP2-30) optimizes space, decreases installation time, and reduces installation costs. This pre-wired dual inverter system houses all the essential protective devices in the least amount of space – at an affordable price. Optional kits are also available for charge controllers and DC system monitoring, that help maintain a small system footprint.

$4,850.00 – The OutBack FLEXpower TWO FP2-GVFX3524 (FP2-28) optimizes space, decreases installation time, and reduces installation costs. This pre-wired dual inverter system houses all the essential protective devices in the least amount of space – at an affordable price. Optional kits are also available for charge controllers and DC system monitoring, that help maintain a small system footprint.

$4,850.00 – The OutBack FLEXpower TWO FP2-GVFX3648 (FP2-29) optimizes space, decreases installation time, and reduces installation costs. This pre-wired dual inverter system houses all the essential protective devices in the least amount of space – at an affordable price. Optional kits are also available for charge controllers and DC system monitoring, that help maintain a small system footprint.

$4,850.00 – The OutBack FLEXpower TWO FP2-VFX3648 optimizes space, decreases installation time, and reduces installation costs. This pre-wired dual inverter system houses all the essential protective devices in the least amount of space – at an affordable price. Optional kits are also available for charge controllers and DC system monitoring, that help maintain a small system footprint.

$4,850.00 – The OutBack FLEXpower TWO FP2-12 optimizes space, decreases installation time, and reduces installation costs. This pre-wired dual inverter system houses all the essential protective devices in the least amount of space – at an affordable price. Optional kits are also available for charge controllers and DC system monitoring, that help maintain a small system footprint.