The Xantrex XW inverter series from Schneider Electric is designed for both off-grid and grid-tie applications with battery backup. Available in 24 or 48 volt versions, these hybrid inverters provide continuous true sine wave, 120/240-volt, split-phase AC power, at 4.0, 4.5, or 6.0 kW. Ideal for residential and commercial applications, XW inverters incorporate a DC to AC inverter, a battery charger, and an AC auto-transfer switch. The design of the XW series makes installation quicker and easier by integrating the best features available in the market with innovative new features by Xantrex, along with balance-of-systems components.

• Peak efficiency 95%
• Search mode power under 8 watts
• Customized settings aren’t lost if DC power is interrupted.
• FCC Part B compliant means less potential interference with radio and telephone equipment.
• One or two XW MPPT charge controllers are required for PV grid-tie operation.
• Efficient power factor corrected battery charging
• Provides dual AC inputs

Complete System Solution Using Modular Components

• The Xantrex XW System is comprised of manageable building blocks: XW Inverter/Chargers, Solar Charge Controller, Automatic Generator Start module, and System Control Panel

• The XW System Control Panel (Xantrex SCP) allows easy configuration and prevents an accidental change of the parameters

Best-in-Class Surge Performance

• The Xantrex XW6048 provides 12 kW of real power output (not just current) to start loads

• The Xantrex XW’s digital control offers rigid voltage regulation while surging to start a difficult load – providing transparent operation to the homeowner

Multi-unit Expandability for Single and Three-phase Systems

• From 4 to 24 kW in a single phase configuration

• From 12 to 36 kW in a three phase configuration

• Xantrex XW Inverters have Xanbus network and sync ports built in, and communicate seamlessly to synchronize invert and charge modes