Outback Power Systems FLEXware   OutBack FLEXware is the next evolution of balance-of-system components intended to replace the PS2 and PS4 product lines. OutBack listened to the suggestions of their integrating partners, installers and system owners, and improved their product.  From knockouts and breaker locations to more shared parts for easier ordering and stocking, the OutBack FLEXware line is the best hardware available.  Better integrated, modular, and more spacious than any of Outback's previous metal hardware, the components are more versatile, there’s more space for wiring, and the all-aluminum, powder-coated construction is highly corrosion resistant for an installation that looks great for longer.   OutBack FLEXware satisfies a large variety of applications by using FLEXware with OutBack's Modular power electronics. The FLEXware 250 offers a solution for AC and DC disconnects in single inverter/charger installations where space and budget are primary concerns. The OutBack FLEXware 500 supports up to two power inverters/chargers and two charge controllers in an attractive, versatile and code-compliant package when split-phase and/or higher power output is needed. The FLEXware 1000 accommodates up to four power inverters/chargers and four charge controllers. Both the FLEXware 500 and the FLEXware 1000 provide locations for auto-transformers, multiple DC shunts and other items required in high power applications. The new OutBack FLEXware MP mounting plate shows the true versatility of the FLEXware line, with its compatibility on both FW500 and FW1000 systems. All of the FLEXware options and accessories have been redesigned and simplified, replacing multiple models with fewer, more universal solutions.   OutBack FLEXware offers more application versatility than ever before - from the simplest of backup power systems to large 36 kW village power systems with multiple power sources such as solar, wind, micro hydro and backup generators. With OutBack Power System’s FLEXware you can really “FLEX your system.”   More Info - Spec Sheet
	OutBack FLEXware 250 (FX250) The FLEXware 250 accommodates all of the essential protective devices in the smallest possible space at the lowest installed cost. The FW250 enclosure is designed to mount on either, or both, ends of an OutBack FX power inverter. Smaller systems can include both the DC disconnect and AC input/output breakers in the same enclosure mounted on just the DC end of the inverter. Systems with more AC and DC components should use two FW250 enclosures, one on each end of the power inverter. The OutBack FLEXware 250 system does not require a FLEXware MP mounting plate or the optional DCA or ACA conduit adapters. The FW250 can also be used on multiple inverter systems when installation space is limited.   As with all of the FLEXware systems – order the necessary DC and AC breakers, AC input-output-bypass kits and all other additional components separately.  For single OutBack FX Power Inverter/Charger systems Mounts directly to the end of an FX Power Inverter/Charger Extremely compact design Can be wall or shelf mounted Can be used for DC or AC components or both Knock-out provided for connection to MX60 charge controller Breaker spaces for battery, PV array or PV GFP breakers Mounting locations for AC GFCI outlet and AC breakers Optional DC current shunt kit mounts on inverter chassis Ground bus bar included standard Powder-coated aluminum with stainless steel hardware
OutBack FLEXware 250 (FW250) DC and/or AC Breaker Enclosure  for Single FX Series Inverter $80.00  FW-IOB-S-120VAC Single Power Inverter Input-Output-Bypass  for FW250 Only $85.00  OBB-GFP-80D-125VDC-PNL Ground Fault Protection $116.00  FW-Shunt250, 500A, 50 mV Shunt with Attached Buss Bar  for FW250 Enclosure $40.00 Call Toll Free to Order: 1-800-877-230-7710 Seen it somewhere for less? Back to top
	OutBack FLEXware 500 (FX500)  For applications with medium power requirements such as homes, light commercial or backup power systems.   The OutBack FLEXware 500 accommodates all of the essential protective devices in two easy-to-install enclosures. The FW500-AC and FX500-DC are both designed to allow mounting in either a horizontal or vertical orientation to allow easier installation in space limited locations. The FLEXware 500 system uses a single FLEXware MP mounting plate and one set of the optional DCA and ACA conduit adapters for each OutBack FX power inverter installed.   As with all of the FLEXware systems – order the necessary DC and AC breakers, AC input-output-bypass kits and all other additional components separately.  For single or dual OutBack FX Power Inverter/Charger systems Accommodates one or two OutBack MX60 Charge Controllers and disconnects Designed for wall-mounting using the FLEXware MP mounting plate Very compact design with room for expansion Separate AC and DC enclosure models Optimized knock-out locations 500 amp shunt assembly included – space for two additional DC shunts included Ground bus bar included standard Powder-coated aluminum with stainless steel hardware FLEXware MP is a one piece, powder coated aluminum mounting plate for FLEXware 500 and FLEXware 1000 systems. The FW-MP make installation quick and easy by including all of the necessary stainless steel hardware to mount both the AC and DC enclosures, inverter/chargers and breakers. A single FW-MP accommodates a complete FLEXware 500 system.
OutBack FLEXware 500-DC (FW500-DC) DC Breaker Enclosure   for up to two OutBack FX Power Inverters    $249.00  OutBack FLEXware 500-AC (FW500-AC) AC Breaker Enclosure   for up to two OutBack FX Power Inverters  $249.00  FLEXware FW-MP Mounting Plate for FW500  $145.00  FW-IOB-D-120/240VAC Dual Power Inverter Input-Output-Bypass for FW500 60 amp  $210.00  FW-IOB-D-230VAC Dual Power Inverter Input-Output-Bypass for FW500 60 amp  $165.00  FW-CCB Side Mount Charge Controller Bracket  $35.00  FW-CCB2 Side Mount Charge Controller Bracket for two OutBack MX60 Charge Controllers  $53.00  FW-CCB2-T Side Mount Charge Controller Bracket for two OutBack MX60 Charge Controllers  $53.00  OBB-GFP-80D-125VDC-PNL Ground Fault Protection  $116.00  FWX-240 4 kVA Auto-transformer  $340.00  FW-Shunt500, 500A, 50 mV Shunt with Terminal Buss Bar and Insulator for FW500 Enclosure  $32.00 Call Toll Free to Order:  1-877-230-7710 Seen it somewhere for less?   Back to top
	OutBack FLEXware 1000 (FX1000)  For applications with large power requirements such as large residential, commercial or village power systems.   The OutBack FLEXware 1000 accommodates all of the required protective devices in two enclosures with room for additional breakers and large AC and DC cable connections. The FW1000-AC and FW1000-DC enclosures are both designed to allow mounting in either a horizontal or vertical orientation to provide more installation flexibility and easier wiring connections. The OutBack FLEXware 1000 system uses two FLEXware MP mounting plates and one set of the optional DCA and ACA conduit adapters for each OutBack FX power inverter installed.   As with all of the FLEXware systems – order the necessary DC and AC breakers, AC input-output-bypass kits and all other additional components separately.  For single, dual, triple or quad OutBack FX Power Inverter/Charger systems Accommodates up to four OutBack MX60 Charge Controllers and disconnects Designed for wall-mounting using two FLEXware MP mounting plates Compact design with room for expansion Can be used as a building block for larger systems Separate AC and DC enclosure models Optimized knock-out locations 1000 amp shunt assembly included – space for two additional shunts included Ground bus bar included standard Powder-coated aluminum with stainless steel hardware FLEXware MP is a one piece, powder coated aluminum mounting plate for FLEXware 500 and FLEXware 1000. The FW-MP make installation quick and easy by including all of the necessary stainless steel hardware to mount both the AC and DC enclosures, inverter/chargers and breakers. Two FW-MP are required for a complete FLEXware 1000 system.
OutBack FLEXware 1000-DC (FW1000-DC) DC Breaker Enclosure for up to two OutBack FX Power Inverters $425.00  OutBack FLEXware 1000-AC (FW1000-AC) AC Breaker Enclosure for up to two OutBack FX Power Inverters $425.00  FLEXware FW-MP Mounting Plate for FW1000 $145.00  FW-IOB-Q-120/240VAC Quad Power Inverter Input-Output-Bypass for FW1000, 120 amp $339.00  FW-IOB-Q-230VAC Quad Power Inverter Input-Output-Bypass for FW1000, 120 amp $295.00  FW-IOB-T-120/208VAC Triple Power Inverter Input-Output-Bypass for FW1000, 60 amp $265.00  FW-CCB Side Mount Charge Controller Bracket $35.00  FW-CCB2 Side Mount Charge Controller Bracket for two OutBack MX60 Charge Controllers $53.00  FW-CCB2-T Side Mount Charge Controller Bracket for two OutBack MX60 Charge Controllers $53.00  OBB-GFP-80D-125VDC-PNL Ground Fault Protection $116.00  FWX-240 4 kVA Auto-transformer $340.00 Call Toll Free to Order:  1-877-230-7710 Seen it somewhere for less?   Back to top
	OutBack Power Systems PS2 The OutBack Power Systems PS2 is a compact power system for one or two FX series chargers inverters, up to three MX60 MPPT charge controllers, a MATE system controller and all the associated AC and DC components of a renewable energy power conversion system. More Info - Spec Sheet
	OutBack Power Systems PS4 AC The OutBack Power Systems PS4 is a fully expandable system for up to four FX series inverters, up to four MX60 MPPT charge controllers, a MATE system controller and all the associated AC and DC components of a large renewable energy power conversion system. More info - Spec Sheet
	OutBack Power Systems PS4 DC The OutBack Power Systems PS4 is a fully expandable system for up to four FX series inverters, up to four MX60 MPPT charge controllers, a MATE system controller and all the associated AC and DC components of a large renewable energy power conversion system. More Info - Spec Sheet