The OutBack FLEXware PV8 and PV12 combiner boxes provide code-compliant fusing for both small and large systems. These highly adaptable combiner boxes are outdoor-rated, rainproof, 3R powder-coated aluminum, and can be mounted vertically, on a pole, or laid on a roof with as little as 14° of slope.  The unique, angled, negative-terminal bus-bar design makes wiring fast and easy.  A tinted flame-retardant polycarbonate deadfront panel creates a clean appearance while preventing accidental contact with the live terminals, yet is easily removable during installation.

• Combine Multiple Strings from a Single Array
• Outdoor Rain-Resistant Aluminum Enclosure
• Optimized Wire Routing For Easy Installation
• Tinted Flame-Retardant Polycarbonate Deadfront Panel
• Generous Wiring Conduit Knockouts
• Wall, Roof or Pole Mountable
• Accommodates dual 2/0 AWG output wiring
• Accommodates 150VDC DC Breakers or 600 VDC Fuses

Includes:  Enclosure, dual combining bus bars, one terminal bus bar, two #1/0 AWG set-screw compression type box lug terminals and one #1/0 AWG ground lug.  USA

PV8 Combiner Box

The PV8 will accept up to 8 breakers for circuits up to 150 VDC and up to 6 breakers for circuits up to 600V. Breakers or fuse holders are sold separately as needed.

PV12 Combiner Box

The PV12 will accept up to 12 DC breakers for circuits up to 150 VDC, or it can be set for up to 8 fuses for high-voltage systems up to 600 VDC. The PV12 can be configured for one or two separate PV-output circuits. Dual-output lug terminals are included for up to 2/0 AWG conductors and give plenty of space for current sensors or lightning protection. The TBB (insulated-terminal bus bar) option is required when running two RV Power Products Solar Boost controls, to provide a second isolated negative circuit. ETL-listed.